數字協定

int PyNumber_Check(PyObject *o)

為 穩定 ABI 的一部分.

Returns 1 if the object o provides numeric protocols, and false otherwise. This function always succeeds.

在 3.8 版的變更: Returns 1 if o is an index integer.

PyObject *PyNumber_Add(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of adding o1 and o2, or NULL on failure. This is the equivalent of the Python expression o1 + o2.

PyObject *PyNumber_Subtract(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of subtracting o2 from o1, or NULL on failure. This is the equivalent of the Python expression o1 - o2.

PyObject *PyNumber_Multiply(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of multiplying o1 and o2, or NULL on failure. This is the equivalent of the Python expression o1 * o2.

PyObject *PyNumber_MatrixMultiply(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分 自 3.7 版本開始.

Returns the result of matrix multiplication on o1 and o2, or NULL on failure. This is the equivalent of the Python expression o1 @ o2.

在 3.5 版被加入.

PyObject *PyNumber_FloorDivide(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return the floor of o1 divided by o2, or NULL on failure. This is the equivalent of the Python expression o1 // o2.

PyObject *PyNumber_TrueDivide(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return a reasonable approximation for the mathematical value of o1 divided by o2, or NULL on failure. The return value is "approximate" because binary floating-point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating-point value when passed two integers. This is the equivalent of the Python expression o1 / o2.

PyObject *PyNumber_Remainder(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the remainder of dividing o1 by o2, or NULL on failure. This is the equivalent of the Python expression o1 % o2.

PyObject *PyNumber_Divmod(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

See the built-in function divmod(). Returns NULL on failure. This is the equivalent of the Python expression divmod(o1, o2).

PyObject *PyNumber_Power(PyObject *o1, PyObject *o2, PyObject *o3)

回傳值：新的參照。 為 穩定 ABI 的一部分.

See the built-in function pow(). Returns NULL on failure. This is the equivalent of the Python expression pow(o1, o2, o3), where o3 is optional. If o3 is to be ignored, pass Py_None in its place (passing NULL for o3 would cause an illegal memory access).

PyObject *PyNumber_Negative(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the negation of o on success, or NULL on failure. This is the equivalent of the Python expression -o.

PyObject *PyNumber_Positive(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns o on success, or NULL on failure. This is the equivalent of the Python expression +o.

PyObject *PyNumber_Absolute(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the absolute value of o, or NULL on failure. This is the equivalent of the Python expression abs(o).

PyObject *PyNumber_Invert(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the bitwise negation of o on success, or NULL on failure. This is the equivalent of the Python expression ~o.

PyObject *PyNumber_Lshift(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of left shifting o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 << o2.

PyObject *PyNumber_Rshift(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of right shifting o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 >> o2.

PyObject *PyNumber_And(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the "bitwise and" of o1 and o2 on success and NULL on failure. This is the equivalent of the Python expression o1 & o2.

PyObject *PyNumber_Xor(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the "bitwise exclusive or" of o1 by o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 ^ o2.

PyObject *PyNumber_Or(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the "bitwise or" of o1 and o2 on success, or NULL on failure. This is the equivalent of the Python expression o1 | o2.

PyObject *PyNumber_InPlaceAdd(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of adding o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 += o2.

PyObject *PyNumber_InPlaceSubtract(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of subtracting o2 from o1, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 -= o2.

PyObject *PyNumber_InPlaceMultiply(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of multiplying o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 *= o2.

PyObject *PyNumber_InPlaceMatrixMultiply(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分 自 3.7 版本開始.

Returns the result of matrix multiplication on o1 and o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 @= o2.

在 3.5 版被加入.

PyObject *PyNumber_InPlaceFloorDivide(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the mathematical floor of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 //= o2.

PyObject *PyNumber_InPlaceTrueDivide(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Return a reasonable approximation for the mathematical value of o1 divided by o2, or NULL on failure. The return value is "approximate" because binary floating-point numbers are approximate; it is not possible to represent all real numbers in base two. This function can return a floating-point value when passed two integers. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 /= o2.

PyObject *PyNumber_InPlaceRemainder(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the remainder of dividing o1 by o2, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 %= o2.

PyObject *PyNumber_InPlacePower(PyObject *o1, PyObject *o2, PyObject *o3)

回傳值：新的參照。 為 穩定 ABI 的一部分.

See the built-in function pow(). Returns NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 **= o2 when o3 is Py_None, or an in-place variant of pow(o1, o2, o3) otherwise. If o3 is to be ignored, pass Py_None in its place (passing NULL for o3 would cause an illegal memory access).

PyObject *PyNumber_InPlaceLshift(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of left shifting o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 <<= o2.

PyObject *PyNumber_InPlaceRshift(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the result of right shifting o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 >>= o2.

PyObject *PyNumber_InPlaceAnd(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the "bitwise and" of o1 and o2 on success and NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 &= o2.

PyObject *PyNumber_InPlaceXor(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the "bitwise exclusive or" of o1 by o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 ^= o2.

PyObject *PyNumber_InPlaceOr(PyObject *o1, PyObject *o2)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the "bitwise or" of o1 and o2 on success, or NULL on failure. The operation is done in-place when o1 supports it. This is the equivalent of the Python statement o1 |= o2.

PyObject *PyNumber_Long(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the o converted to an integer object on success, or NULL on failure. This is the equivalent of the Python expression int(o).

PyObject *PyNumber_Float(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the o converted to a float object on success, or NULL on failure. This is the equivalent of the Python expression float(o).

PyObject *PyNumber_Index(PyObject *o)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the o converted to a Python int on success or NULL with a TypeError exception raised on failure.

在 3.10 版的變更: The result always has exact type int. Previously, the result could have been an instance of a subclass of int.

PyObject *PyNumber_ToBase(PyObject *n, int base)

回傳值：新的參照。 為 穩定 ABI 的一部分.

Returns the integer n converted to base base as a string. The base argument must be one of 2, 8, 10, or 16. For base 2, 8, or 16, the returned string is prefixed with a base marker of '0b', '0o', or '0x', respectively. If n is not a Python int, it is converted with PyNumber_Index() first.

Py_ssize_t PyNumber_AsSsize_t(PyObject *o, PyObject *exc)

為 穩定 ABI 的一部分.

Returns o converted to a Py_ssize_t value if o can be interpreted as an integer. If the call fails, an exception is raised and -1 is returned.

If o can be converted to a Python int but the attempt to convert to a Py_ssize_t value would raise an OverflowError, then the exc argument is the type of exception that will be raised (usually IndexError or OverflowError). If exc is NULL, then the exception is cleared and the value is clipped to PY_SSIZE_T_MIN for a negative integer or PY_SSIZE_T_MAX for a positive integer.

int PyIndex_Check(PyObject *o)

為 穩定 ABI 的一部分 自 3.8 版本開始.

Returns 1 if o is an index integer (has the nb_index slot of the tp_as_number structure filled in), and 0 otherwise. This function always succeeds.